PowderPuff Accessories
PowderPuff Accessories Overview
PowderPuff Accessories Powder Actuated Tool, All the DRIVE-ABILITY without the NOISE!
Concrete, Masonry, Wood and Steel Applications
Click on the Tabs Below for PowderPuff Accessories Order Numbers
• Power Loads
• Drive Pins
• Nosepieces
• Replacement Pistons
See Images In Picture Gallery When Referencing Part Numbers
Exclusively Designed for the PowderPuff
• Loads work in concrete, masonry, wood and steel applications
• 3 load levels
• 10 loads per stript
| DESCRIPTION | PART # | BOX QTY | CASE QTY |
|---|---|---|---|
| Gray #1 Light | PPL1 | 100 | 1000 |
| Brown #2 Medium | PPL2 | 100 | 1000 |
| Green #3 Strong | PPL3 | 100 | 1000 |
CEAS Offers a Variety of Nosepieces for your Application
| NOSEPIECE | DRIVE LENGTH | PART | #QTY |
|---|---|---|---|
| Yellow | 5/8” to 3/4” Pins | PPNP075 | 1 |
| Orange | 1” Pins | PPNP100 | 1 |
| Purple | 1-1/4” to 1-1/2” Pins | PPNP125 | 1 |
| Red | 3/4” to 1-1/2” Pins | PPNPADJ | 1 |
| Green | 2” to 2-1/2” Pins | PPNP200 | 1 |
| Blue | 1” Pins 1/4” Head Dia. | PPNP2587 | 1 |
A - See Picture - Drivepin
• 0.145 Dia. Drivepin
• Designed for use in general concrete applications
• ICC Approved
| LENGTH | PART # | BOX QTY | CASE QTY |
|---|---|---|---|
| 1” | PM100 | 100 | 1000 |
| 1-1/4” | PM125 | 100 | 1000 |
| 1-1/2” | PM150 | 100 | 1000 |
| 2” | PM200 | 100 | 1000 |
| 2-1/2” | PM250 | 100 | 1000 |
B - See Picture - Drivepin with Washer
• 0.145 Dia. Drivepin with Washer
• For attaching light gauge metal to concrete and steel (ie: Junction boxes or HVAC duct straps)
• ICC Approved
| LENGTH | PART # | BOX QTY | CASE QTY |
|---|---|---|---|
| 1” | PM100W | 100 | 1000 |
| 1-1/4” | PM125W | 100 | 1000 |
| 1-1/2” | PM150W | 100 | 1000 |
| 2” | PM200W | 100 | 1000 |
| 2-1/2” | PM250W | 100 | 1000 |
C - See Picture - One Hole Conduit Strap with Drivepin
• 1” Shank Length x 0.145” Dia. Drivepin
• Used to attach conduit or armored cable to concrete
• Pre-assembled to 16 ga Strap
• ICC Approved Fasteners
| DESCRIPTION | LG | PART # | BOX QTY | CASE QTY |
|---|---|---|---|---|
| 3/8” EMT/MC | 1” | PCS037M100 | 50 | 500 |
| 1/2” EMT/MC | 1” | PCS050M100 | 50 | 500 |
| 3/4” EMT/MC | 1” | PCS075M100 | 25 | 250 |
| 1” EMT/MC | 1” | PCS0100M100 | 25 | 250 |
D - See Picture - Cable Tie Clip Drivepin
• 7/8” Shank Length x 0.102 Dia.
• Intended as an attachment point for Zip Tie and Tie Wire to concrete
• ICC Approved
| LENGTH | PART # | BOX QTY | CASE QTY |
|---|---|---|---|
| 7/8” | PCTL087 | 100 | 1000 |
E - See Picture - Dimple Clip Drivepin
• 1-1/4” Shank Length x 0.145 Dia.
• Designed for suspended ceilings and other overhead applications into concrete
• Assemblies available pre-tied to ceiling wire
• ICC Approved
| LENGTH | PART # | BOX QTY | CASE QTY |
|---|---|---|---|
| 1-1/4” | PDCM125 | 100 | 1000 |
F - See Picture - Dimple Clip Timberpin
• 2-1/2” Ring Shank Fastener
• Designed for suspended ceilings and other overhead applications into Wood
• Assemblies available pre-tied to ceiling wire
| LENGTH | PART # | BOX QTY | CASE QTY |
|---|---|---|---|
| 2-1/2” | PDTP250 | 500 | 500 |
G - See Picture - Knurled Steel Drivepin
• 5/8” Shank Length x 0.145 Dia.
• Designed for use in general steel applications
• ICC Approved
| LENGTH | PART # | BOX QTY | CASE QTY |
|---|---|---|---|
| 5/8” | PM062 | 100 | 1000 |
Replacement Pistons
• Simply unscrew the nosepiece to remove and replace the piston
| Description | Part # |
|---|---|
| Standard 5/16” Piston | PPP1 |
| Piston for 1/4” Headed Fasteners (Blue Nosepiece) | PPP2 |